Gallery
Specific advantages
- Added comfort and absorption of prespiration, due to the cotton flock-lining
- Tactile sensitivity, due to the gloves reduced thickness
- Good grip, due to the non-slip embossing
Applications
Automotive/mechanical industry
- Spray-painting
Other industries
- Industrial cleaning, maintenance
Aeronautics industry
- Work with composite materials (resins)
Standards
- CAT. 3
0334 
2110X- Type B
KMT 
Product detail
| Material | Polychloroprene and natural latex |
|---|---|
| Colour | Blue, yellow |
| Interior Finish | Flocked |
| Exterior Finish | Embossed texture |
| Length (cm) | 33 |
| Thickness (mm) | 0.7 |
| Size | 6 7 8 9 10 |
| Packaging | 1 pair/bag 10 pairs/bag 100 pairs/carton |
Chemical chart
Overall Chemical Protection Rating
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of colors :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| Acetic acid 50% | 64-19-7 | 480 | 6 | ASTM F739 | NT |
|
| Acetic acid 99% | 64-19-7 | 48 | 2 | EN 16523-1:2015 | NT |
|
| Acetone 99% | 67-64-1 | 14 | 1 | ASTM F739 | 4 |
|
| Acetonitrile 99% | 75-05-8 | 15 | 1 | ASTM F739 | 4 |
|
| Ammonium hydroxide solution 25% | 1336-21-6 | 23 | 1 | EN 16523-1:2015 | NT |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 62 | 3 | ASTM F739 | NT |
|
| Bromine 100% | 7726-95-6 | 6 | 0 | EN 374-3:2003 | NT |
|
| Carbon disulfide 99% | 75-15-0 | 2 | 0 | ASTM F739 | 1 |
|
| Citric Acid 10% | 77-92-9 | 480 | 6 | ASTM F739 | NT |
|
| Cyclohexanone 99% | 108-94-1 | 11 | 1 | EN 374-3:2003 | 3 |
|
| Dibutyl Phthalate 99% | 84-74-2 | 480 | 6 | ASTM F739 | NT |
|
| Dichloromethane (Methylene Chloride) 99% | 75-09-2 | 4 | 0 | ASTM F739 | 1 |
|
| Diethylamine 98% | 109-89-7 | 5 | 0 | ASTM F739 | 1 |
|
| Dimethylformamide 99% | 68-12-2 | 85 | 3 | ASTM F739 | 4 |
|
| Dimethylformamide 99% | 68-12-2 | 30 | 1 | EN 374-3:2003 | 4 |
|
| Dimethylsulfoxide 99% | 67-68-5 | 368 | 5 | ASTM F739 | NT |
|
| Dioctyl Phthalate 99% | 117-81-7 | 480 | 6 | ASTM F739 | NT |
|
| Ethanol 95% | 64-17-5 | 22 | 1 | EN 374-3:2003 | 3 |
|
| Ethyl acetate 99% | 141-78-6 | 8 | 0 | ASTM F739 | 3 |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Gun Flush ES mixture | NA | 67 | 3 | ASTM F739 | NT |
|
| Hydrochloric acid 10% | 7647-01-0 | 480 | 6 | EN 374-3:2003 | NT |
|
| Hydrochloric acid 35% | 7647-01-0 | 480 | 6 | EN 374-3:2003 | NT |
|
| Methanol 85% | 67-56-1 | NT | NT | 4 |
|
|
| Methanol 99% | 67-56-1 | 23 | 1 | ASTM F739 | 4 |
|
| Methanol 99% | 67-56-1 | 13 | 1 | EN 374-3:2003 | 4 |
|
| Methyl Ethyl Ketone (2-Butanone) 99% | 78-93-3 | 12 | 1 | ASTM F739 | 3 |
|
| Methyl Ethyl Ketone (2-Butanone) 99% | 78-93-3 | 4 | 0 | EN 374-3:2003 | 3 |
|
| n-hexane 95% | 110-54-3 | 6 | 0 | ASTM F739 | 1 |
|
| N-methyl-2-Pyrrolidone 99% | 872-50-4 | 39 | 2 | EN 374-3:2003 | 4 |
|
| N-N dimethyl acetamide 30% | 127-19-5 | NT | NT | 4 |
|
|
| N-N dimethyl acetamide 99% | 127-19-5 | 22 | 1 | EN 374-3:2003 | 4 |
|
| Nitric acid 65% | 7697-37-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Nitrobenzene 99% | 98-95-3 | 33 | 2 | ASTM F739 | NT |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | ASTM F739 | 3 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | 3 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Styrene 99% | 100-42-5 | 6 | 0 | ASTM F739 | 1 |
|
| Styrene 99% | 100-42-5 | 5 | 0 | EN 374-3:2003 | 1 |
|
| Sulfuric acid 10% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 40% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 50% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 96% | 7664-93-9 | 12 | 1 | ASTM F739 | NT |
|
| Sulfuric acid 96% | 7664-93-9 | 226 | 4 | EN 16523-1:2015 | NT |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 8 | 0 | ASTM F739 | 1 |
|
| Tetrahydrofurane 99% | 109-99-9 | 5 | 0 | ASTM F739 | 1 |
|
| Toluene 99% | 108-88-3 | 7 | 0 | ASTM F739 | 1 |
|
| Unisolve EX mixture | NA | 73 | 3 | ASTM F739 | NT |
|
*not normalized result
Reviews
There are no reviews yet.